(843) 708-8735
GET A QUICK QUOTE

Home of the $0 FREE Service Call Club | 0% Interest for 24 Months

Transparent Logo
(843) 708-8735
GET A QUICK QUOTE

Home of the $0 FREE Service Call Club | 0% Interest for 24 Months

Transparent Logo
(843) 708-8735
GET A QUICK QUOTE

Home of the $0 FREE Service Call Club | 0% Interest for 24 Months

Transparent Logo

Summers in Summerville are hot and sticky, and having a dependable air conditioner isn’t a luxury—it’s a must. When the heat really settles in, your AC gets a heavy workout trying to keep your home cool and comfortable. But if something goes wrong inside the unit, especially with the compressor, you might find yourself sweating it out indoors. The compressor acts like the heart of your AC, moving refrigerant through the system so warm air gets removed and replaced with cool air.

If the compressor isn’t working properly, your system starts to struggle. You may still hear it running, but the air might not feel any cooler. Many people don’t even realize their AC’s compressor is failing until the system stops altogether or the house never reaches the right temperature. Catching the signs early can help prevent bigger damage and save you from being surprised by a full breakdown right in the middle of a hot Summerville day.

Common Signs Of Compressor Problems

The compressor plays a big role in making your AC do what it’s supposed to—cool the air and keep your home comfortable. When it starts to run into trouble, there are often a few early warning signs. Knowing how to pick up on them can give you time to get the issue checked out before it turns into something bigger and more expensive.

Here are some of the most common signs that could mean your compressor is struggling:

– Strange noises from the outdoor unit: If you hear grinding, clicking, or buzzing, that’s not normal. The compressor motor could be wearing out or hitting internal issues.

– Warm air coming from the vents: If the fan is running but the air doesn’t feel cold, your compressor might not be circulating the refrigerant like it should.

– Tripped circuit breakers: Electrical overloads caused by compressor problems can lead to frequent breaker issues.

– Unit turns on but doesn’t cool: When the outside unit seems to be running but your home never cools down, the compressor might be the issue.

– AC shuts down randomly: Short-cycling or automatic shutdowns might signal a compressor trying to protect itself from more damage.

Let’s say you’ve been running your AC all afternoon and it still feels warm inside, even though your thermostat is set low. You check the unit and notice it’s making an odd humming noise, but the airflow feels weak and not very cold. That combo often points to a compressor that’s not doing its job properly.

Some of these symptoms could also be caused by low refrigerant levels or airflow restrictions. But if multiple signs show up at once, it’s safe to say that something’s likely wrong with the compressor, and it’s time for a professional to take a look.

Causes Of Compressor Problems

Compressor trouble doesn’t usually happen out of nowhere. It builds over time, and there are a few common factors that cause it to wear out or break down. Understanding those causes can help you avoid them and extend the life of your AC.

Here are some of the typical reasons compressors fail:

1. Lack of maintenance: When your system isn’t cleaned or checked regularly, dust, grime, and old filters can put extra strain on the entire unit. That stress adds up, and compressive parts wear down faster.

2. Refrigerant leaks: Too much or too little refrigerant can mess with the pressure levels in the system. That imbalance forces the compressor to work outside its normal range and increases the chance of failure.

3. Overheating: Dirt buildup, blocked airflow, or running the AC in high outdoor temps for long periods can all overheat the compressor. High heat can wreck internal parts or cause the motor to shut off.

4. Electrical issues: Wiring problems, loose connections, or faulty capacitors can create voltage spikes that damage the compressor or keep it from turning on.

5. Age: Even if you take good care of your AC, the compressor won’t last forever. Most eventually wear down after years of heavy use.

One way to help avoid these problems is by scheduling seasonal AC check-ups. That lets a technician spot early warning signs before they get worse. Keeping your filters clean, using your thermostat wisely, and being aware of how your system sounds and feels all go a long way in keeping your compressor and your cool working right through the Summerville heat.

Diagnosing Compressor Issues

When your AC is on the fritz, it might seem like a good idea to try and fix the problem yourself. But diagnosing compressor issues can be tricky and is best left to the pros. HVAC technicians have the expertise and tools to properly assess the situation without causing further damage. They typically follow a series of steps to pinpoint the problem.

1. Visual Inspection: Techs start by visually checking the AC unit for any obvious signs of damage or wear.

2. Testing Electrical Components: They use multimeters to check for any electrical issues, ensuring the compressor is receiving the correct voltage.

3. Pressure Testing: Using gauges, they measure the pressure levels within the system to see if there are refrigerant imbalances affecting the compressor.

4. Listen and Observe: They listen for unusual noises and observe how the unit is running to detect any mechanical issues.

5. System Performance Check: Finally, they assess overall system performance and cross-check findings to narrow down the source of the problem.

Professional diagnosis isn’t just about identifying issues. It’s about doing so safely and preventing unnecessary costs. Letting the experts handle it can save you time and stress, ensuring your AC is back up and running smoothly.

When to Consider Compressor Replacement

Faced with a faulty compressor, you might wonder if it’s better to repair or replace it altogether. In some cases, replacing the compressor can be the smarter choice. If your AC is relatively new and under warranty, a repair might be covered, making it worth considering. However, if your system is older or has frequent problems, replacement might be more cost-effective in the long run.

Here are scenarios where replacing the compressor makes sense:

– The unit is over 10 to 15 years old and nearing the end of its life

– Repairs cost over half as much as a new compressor would

– Utility bills are rising due to an inefficient system

– Frequent breakdowns have been a pattern, indicating deeper issues

A new compressor can improve energy efficiency, reducing your electricity costs while delivering more reliable cooling. Plus, newer models often come with better features and warranties, giving you peace of mind for years to come.

Keeping Your AC Healthy in Summerville

To get the most out of your AC and keep the compressor in top shape, regular maintenance is key. Simple routines can make a big difference in preventing problems before they start.

– Schedule yearly tune-ups: An annual check-up by a technician can spot issues early and ensure everything runs efficiently

– Change filters regularly: Dirty filters force the system to work harder, risking damages to the compressor. Swap them out every 1 to 3 months

– Keep outdoor units clean: Clear debris and leaves from around the unit to make sure airflow isn’t restricted

– Check for refrigerant leaks: Unusual cooling or hissing noises? Get these checked to avoid strain on the compressor

Following these steps can add years to your AC’s life and maintain a cool, comfortable home in Summerville. Investing a little time now can save a lot of trouble later, helping you stay cool when it matters most.

If your AC is showing signs of trouble, don’t wait until it’s too late. Make sure your home stays cool and comfortable by exploring our comprehensive services for air conditioning in Summerville. The experts at Coastal Carolina Comfort are ready to keep your system running smoothly, providing peace of mind during the hottest months. Reach out to us today for more information on how we can assist you.

Share This Post

Get 10% Off Your First Service and a FREE Quote


More To Explore

A man in a polo shirt stands indoors, adjusting a switch on an open electrical panel while performing AC troubleshooting. The room features wooden floors and a hallway visible in the background.
Air Conditioning

My AC Won’t Turn On: Troubleshooting Before You Call a Technician

My AC Won’t Turn On: Troubleshooting Before You Call a Technician When your AC system won’t turn on at all — no fan, no compressor, no response to thermostat changes — the cause is either an interruption in the electrical supply reaching the system (tripped breaker, blown fuse, safety switch activation, thermostat failure) or a failure of a startup component within the system itself (dead capacitor, burned contactor, failed control board, or seized compressor). About 30% of “AC won’t start” calls that Coastal Carolina Comfort responds to across South Carolina are resolved by the homeowner checks described below. The remaining 70% require professional diagnosis and repair. Coastal Carolina Comfort provides same-day diagnostic service for systems that won’t start across Summerville, Charleston, Columbia, and the entire Lowcountry and Midlands. Our NATE-certified technicians carry the common startup components — capacitors, contactors, control boards — needed to restore your system in a single visit. Call (843) 708-8735. Homeowner Troubleshooting: 6 Checks Before You Call These checks are safe for any homeowner to perform and take less than 10 minutes total. Work through them in order. Check 1: Thermostat Power and Settings Start at the thermostat — it’s the most common cause of a system that appears dead. Verify it has power. If the display is blank, the thermostat has lost power. Check whether it uses batteries (replace them) or is wired to the system (a tripped breaker or blown fuse at the air handler may have cut power to the thermostat). Verify the settings. Ensure the system is set to “cool” (not “off,” “heat,” or “fan only”), the set temperature is at least 3–5°F below the current room temperature, and any scheduling or away modes aren’t overriding your settings. Try a hard reset. Turn the thermostat completely off, wait 30 seconds, then turn it back to cooling mode. For smart thermostats, a power cycle or factory reset can resolve software glitches that prevent the system from responding. If the thermostat appears to be working correctly — display is on, settings are correct, it shows “cooling” — but the system doesn’t respond, the issue is downstream. Check 2: Circuit Breakers Your AC system typically uses two circuit breakers in your main electrical panel: one for the indoor air handler and one for the outdoor condenser unit. Check both. Look for a tripped breaker. A tripped breaker sits in the middle position — not fully “on” and not fully “off.” Push it firmly to “off” first, then back to “on.” If the breaker holds and the system starts, monitor it. If the breaker trips again within minutes, do not reset it a third time — the system has an electrical fault that requires professional diagnosis. Check for a blown fuse at the air handler. Some air handlers have a small fuse (typically 3–5 amp) on the control board that protects the low-voltage circuit. If this fuse blows, the thermostat loses its ability to communicate with the system. This fuse is accessible inside the air handler’s front panel — but if you’re not comfortable opening the panel, skip this check and call for service. Check 3: Emergency Shutoff Switch Many AC installations include a wall-mounted emergency shutoff switch that looks like a standard light switch — typically located near the indoor air handler or in the utility closet. If someone accidentally flipped this switch off (during maintenance, painting, or cleaning), the entire system is disabled. Check for a switch near the air handler that might be in the “off” position. Flip it on and see if the system responds. Check 4: Condensate Drain Safety Switch Many South Carolina HVAC installations include a float switch on the condensate drain line that shuts the system down when the drain line clogs and water backs up. This is a safety feature designed to prevent water damage — but it also means a simple drain clog can make your entire AC system unresponsive. If your system has a visible float switch on the drain line (a small device with a float attached to the PVC pipe near the air handler), check whether standing water is visible in the drain pan. If the pan is full, the float switch has activated. Clearing the drain line may restore system operation. Our guide on AC leaking water inside your house covers drain line clearing in detail. Check 5: Outdoor Disconnect Box Near your outdoor condenser unit, there’s a disconnect box — a small metal box mounted on the wall within a few feet of the unit. This box contains either a pull-out fuse block or a breaker that supplies power specifically to the outdoor unit. Check that the disconnect is in the “on” position and that the fuses (if applicable) haven’t blown. A blown disconnect fuse is a common cause of a system where the indoor fan runs but the outdoor unit doesn’t respond at all. Check 6: Wait 5 Minutes After Any Reset Modern AC systems have built-in time delays that prevent the compressor from restarting too quickly after a shutdown — rapid cycling can damage the compressor. If you’ve reset a breaker, flipped a switch, or changed the thermostat, wait at least 5 minutes before concluding the system isn’t responding. The delay is protecting your equipment. If the Homeowner Checks Don’t Work: Common Professional Repairs When all homeowner-accessible checks fail to restore the system, one of these mechanical or electrical failures is typically the cause. Failed Capacitor The run capacitor provides the electrical boost the compressor and fan motors need to start. When it fails, the motors can’t overcome their starting inertia. You might hear a clicking sound from the outdoor unit as the contactor engages, followed by a hum and then silence — the system is trying to start but the capacitor can’t deliver. Capacitor failure is the single most common reason an AC system won’t start. It’s also one of the most affordable repairs: $150–$300 including parts and labor. In South Carolina’s long cooling season, capacitors endure more

Derrick Hall March 17, 2026
A close-up view of an air conditioner evaporator coil covered with a thick layer of ice and frost, indicating a malfunction or freezing issue.
Air Conditioning

AC Frozen Evaporator Coil: Why Your Air Conditioner Ices Up in Humid SC Weather

AC Frozen Evaporator Coil: Why Your Air Conditioner Ices Up in Humid SC Weather A frozen evaporator coil occurs when the coil’s surface temperature drops below 32°F and moisture from your indoor air freezes on contact, building a layer of ice that blocks airflow and prevents heat absorption. The most common causes are restricted airflow from a clogged filter or dirty coil, low refrigerant charge from a leak, and blower motor failure that reduces air volume across the coil. In South Carolina’s high-humidity environment, frozen coils are both more common and more damaging than in drier climates — the heavy moisture content in Lowcountry and Midlands air means ice builds faster and produces more water when it melts. Coastal Carolina Comfort diagnoses and repairs frozen evaporator coils across Summerville, Charleston, Columbia, and all of South Carolina. Our NATE-certified technicians identify the root cause — not just thaw the ice — and provide upfront pricing before any repair begins. Call (843) 708-8735. How a Frozen Coil Damages Your AC System A frozen evaporator coil isn’t just a temporary inconvenience — it creates a cascade of problems that can damage multiple components if the system continues running. The compressor is at greatest risk. Under normal operation, liquid refrigerant enters the evaporator coil, absorbs heat, and exits as a gas before returning to the compressor. When the coil freezes, this heat exchange stops. Liquid refrigerant passes through the coil without vaporizing and reaches the compressor in liquid form. Compressors are designed to pump gas, not liquid. Liquid refrigerant entering the compressor — called liquid slugging — can crack valves, damage pistons, and cause catastrophic compressor failure. A compressor replacement typically costs $1,500–$3,000+. Water damage when the ice melts. A frozen coil accumulates a surprising amount of ice. When the system shuts off or the ice begins to melt, the resulting water can easily overwhelm the drain pan — especially if the drain line is also partially clogged (a common combination in South Carolina). Water overflows onto floors, into ceilings, or through walls. Read our guide on AC leaking water inside your house for immediate steps if you’re already dealing with water. Reduced system life. Repeated freeze-thaw cycles stress the coil fins, degrade the coil’s protective coating, and can eventually cause refrigerant leaks in the coil itself — one of the most expensive AC repairs. The 5 Causes of Frozen Evaporator Coils in South Carolina 1. Clogged Air Filter This is the most common cause — and the most preventable. A clogged filter restricts the volume of warm air passing over the evaporator coil. Without sufficient warm air, the coil’s temperature drops below the freezing point. Moisture in the air freezes on contact, and the ice layer further restricts airflow, accelerating the freeze. In South Carolina, where pet dander, pollen, dust, and high humidity all contribute to faster filter loading, a filter that might last 90 days in a drier climate may need replacement every 30 days during peak cooling season. The fix: Replace the filter, turn the system off for 2–3 hours to allow complete thawing, then restart. If the system runs normally and doesn’t refreeze, the filter was the sole cause. If ice returns within 24 hours, there’s an additional underlying issue. 2. Low Refrigerant From a Leak Low refrigerant charge causes the evaporator coil’s temperature to drop below normal operating range. When the coil is too cold, moisture freezes on its surface instead of condensing into liquid and draining away. The ice insulates the coil, making it even colder, and the freeze accelerates until the coil is completely encased. This is the most common mechanical cause of frozen coils, and it requires professional repair. A technician will thaw the coil, test for leaks, repair the leak source, and recharge the system to manufacturer specifications. Simply adding refrigerant without fixing the leak guarantees the problem will return. In South Carolina’s coastal environment, refrigerant line corrosion from salt air is a significant contributor to leaks — particularly on homes within a few miles of Charleston Harbor, James Island, or the Isle of Palms. 3. Dirty Evaporator Coil Even with regular filter changes, the evaporator coil accumulates dust, biological growth, and particulate matter over time — especially in South Carolina’s humid environment where mold and mildew thrive on the constantly damp coil surface. A dirty coil insulates itself from the warm air passing over it. The coil can’t absorb enough heat, its temperature drops, and the same freeze cycle begins. The difference is that a dirty-coil freeze develops more gradually than a low-refrigerant freeze — you might notice declining performance for weeks before ice becomes visible. The fix: Professional coil cleaning. This requires access to the indoor unit, coil-specific cleaning solution, and careful handling to avoid damaging the delicate aluminum fins. Coil cleaning is typically included in comprehensive maintenance visits that prevent frozen coils and costs $150–$300 as a standalone service. 4. Blower Motor Failure or Reduction The blower motor moves air across the evaporator coil. If it fails entirely, airflow stops completely and the coil freezes rapidly. A partially failing motor — running at reduced speed due to worn bearings, a failing capacitor, or a winding issue — moves insufficient air, causing a slower but equally damaging freeze. In multi-speed systems, a motor stuck on low speed may provide enough airflow for mild days but insufficient volume on high-demand days, creating intermittent freezing that’s harder to diagnose. 5. Collapsed or Blocked Return Ductwork If the return duct — the large duct that carries warm room air back to the air handler — is crushed, disconnected, or severely blocked, the volume of air reaching the evaporator coil drops below the minimum threshold. This can happen when stored items are placed on flex duct in an attic, when a duct joint separates due to age or poor installation, or when a return vent is blocked by furniture or closed. This cause is more common in homes with ductwork routed through attics — a standard

Derrick Hall March 17, 2026

SCHEDULE A $0 FREE SERVICE CALL AND GET A FREE QUOTE


GET A FREE ESTIMATE and schedule service


GET A FREE ESTIMATE and schedule service