HVAC Repair vs. Replacement: A Summerville Homeowner’s Decision Guide

Deciding between HVAC repair and replacement comes down to four key factors: the cost of repair relative to replacement (use the 50% rule—if repairs exceed half the cost of a new system, replace), the age of your equipment (systems over 15 years old are usually better replaced), refrigerant type (R-22 systems should be replaced due to phase-out costs), and repair frequency (multiple repairs per year signal it’s time). Summerville homeowners should also factor in energy efficiency gains, available rebates, and the demanding Lowcountry climate that shortens system lifespans compared to national averages.

The Question Every Homeowner Dreads

Your HVAC technician just delivered the news: your system needs a major repair. Maybe it’s a compressor. Maybe it’s a coil leak. Whatever it is, the number has four digits, and now you’re facing the question every Summerville homeowner eventually confronts.

Do I fix it, or do I replace the whole thing?

It’s not an easy decision. Repair feels like the cheaper option—until you’re repairing again six months later. Replacement feels like the responsible choice—until you see the price tag. And everyone from your neighbor to your brother-in-law has an opinion.

At Coastal Carolina Comfort, we’ve guided thousands of Lowcountry homeowners through this exact decision. We’ve seen people waste money repairing systems that should have been replaced years ago. We’ve also seen people replace perfectly good equipment because someone talked them into it.

This guide will give you the framework to make the right decision for your situation—not based on sales pressure, but on facts, math, and what actually makes sense for your home and budget.

The 50% Rule: Your Starting Point

The most reliable rule of thumb in the HVAC industry is simple:

If the repair costs more than 50% of what a new system would cost, replace instead of repair.

Here’s why this works:

The Math Behind the Rule

Let’s say a new HVAC system for your Summerville home costs $8,000 installed. Using the 50% rule:

Repair cost under $4,000: Repair is likely the better value
Repair cost over $4,000: Replacement makes more financial sense

But this isn’t just about today’s repair. It’s about what comes next.

A system that needs a $3,500 repair today is likely to need another significant repair within 1-2 years. That’s the nature of aging equipment—when major components fail, others are usually close behind.

So that $3,500 repair might actually cost you $3,500 + $1,200 + $800 over the next two years. Suddenly you’ve spent $5,500 and still have an old, inefficient system.

When to Adjust the Rule

The 50% rule is a starting point, not an absolute. Adjust based on:

System age: For systems under 8 years old, you might stretch to 60-70% before replacing—they likely have more good years ahead. For systems over 12 years old, consider replacing at 30-40% of replacement cost.

Repair history: If this is the first major repair on a well-maintained system, lean toward repair. If it’s the third repair this year, lean toward replacement regardless of cost.

Component involved: Some repairs (capacitor, contactor, fan motor) are normal wear items that don’t indicate broader system failure. Others (compressor, evaporator coil) often signal the beginning of the end.

The Age Factor: How Old Is Too Old?

System age is the second most important factor in your decision.

Average HVAC Lifespan

National average: 15-20 years with proper maintenance

Summerville reality: 12-16 years is more typical

Why the difference? Our systems work harder. A Summerville AC runs 8-9 months per year, often 12+ hours per day during summer. Compare that to a system in Minneapolis that might run 4 months per year. More operating hours means faster wear.

Age-Based Decision Framework

Under 8 years old: Almost always repair unless the cost exceeds 50% of replacement. These systems have significant life remaining.

8-12 years old: Evaluate carefully. Major repairs may be worthwhile, but start planning for eventual replacement. This is a good time to begin saving.

12-15 years old: Lean toward replacement for major repairs. The system is in its final years, and repair money is often better invested in new equipment.

Over 15 years old: Replace for any significant repair. Even if the repair is relatively affordable, you’re likely facing additional failures soon. The efficiency gains alone often justify replacement.

The Warranty Consideration

Most HVAC systems come with:

5-10 year compressor warranty
5-10 year parts warranty
1 year labor warranty (sometimes extended by the installer)

If your system is still under warranty, repair almost always makes sense—your out-of-pocket cost is limited to labor and any non-covered parts.

Check your paperwork or call your installer to verify warranty status before making any decisions.

The R-22 Refrigerant Problem

If your system uses R-22 refrigerant (also called Freon or HCFC-22), this single factor may make your decision for you.

What Happened to R-22

R-22 was the standard air conditioning refrigerant for decades. However, due to its ozone-depleting properties, the EPA phased it out:

2010: No new R-22 systems could be manufactured
2020: Production and import of R-22 banned entirely

This means all R-22 available today is either recycled or reclaimed from decommissioned systems. Supply is limited and shrinking every year.

The Cost Impact

R-22 prices have skyrocketed:

2010: Approximately $10-15 per pound
2020: Approximately $50-75 per pound
2026: $100-200+ per pound depending on availability

A typical residential AC system holds 6-12 pounds of refrigerant. If your R-22 system develops a leak, you’re looking at:

Leak repair: $200-$1,000+ depending on location
Refrigerant recharge: $600-$2,400+ for a full charge
Total cost: Often $1,000-$3,000+ for a single repair

And here’s the kicker—if it leaks once, it will likely leak again. You could face these costs repeatedly.

How to Know If You Have R-22

Check the data plate on your outdoor unit. Look for:

“R-22” or “HCFC-22” = R-22 system (consider replacement)
“R-410A” or “Puron” = Modern refrigerant (repair may make sense)

If your system was installed before 2010, it almost certainly uses R-22. Systems installed 2010-2015 could be either. Systems installed after 2015 are virtually all R-410A.

Our Recommendation

If you have an R-22 system that needs any refrigerant-related repair, replace it. The ongoing costs of maintaining an R-22 system are simply not sustainable. Put that repair money toward a new, efficient system with readily available refrigerant.

Repair Frequency: The Pattern That Tells the Truth

Sometimes the decision isn’t about one big repair—it’s about the pattern of smaller ones.

Warning Signs in Your Repair History

Red flags that suggest replacement:

Three or more repairs in the past two years
Annual repair costs exceeding $500
Same component failing repeatedly
Different components failing in sequence
Repairs becoming more frequent over time

Signs that repair is still reasonable:

First significant repair on the system
Repairs limited to normal wear items (capacitors, contactors, fan motors)
Several years between repairs
System otherwise performs well

The “Death by a Thousand Cuts” Trap

We see this constantly: a homeowner repairs their system for $300, then $450 six months later, then $275, then $600. Each repair seems reasonable in isolation. But add them up over two years and they’ve spent $1,625 on a system that’s still old and inefficient.

That money could have been a down payment on a new system with a warranty, better efficiency, and 15+ years of reliable service ahead.

Track your repairs. Keep receipts or a simple log. When you can see the pattern on paper, the decision often becomes obvious.

Energy Efficiency: The Hidden Cost of Old Equipment

When comparing repair vs. replacement costs, most homeowners forget to factor in efficiency.

Understanding SEER Ratings

SEER (Seasonal Energy Efficiency Ratio) measures how efficiently an AC converts electricity into cooling. Higher SEER = lower operating costs.

SEER standards over time:

Pre-2006: No minimum standard (many systems were 8-10 SEER)
2006-2014: Minimum 13 SEER required
2015-2022: Minimum 14 SEER required
2023+: Minimum 15 SEER required in the Southeast (including South Carolina)

Modern high-efficiency systems range from 16-26 SEER.

Real Dollar Impact

Let’s compare a 10 SEER system (typical of pre-2006 installations) to a new 16 SEER system:

Assumptions:

2,000 square foot Summerville home
Average summer electricity rate of $0.13/kWh
2,000 cooling hours per year (conservative for Lowcountry)

Annual cooling costs:

10 SEER system: Approximately $1,200-1,400/year
16 SEER system: Approximately $750-875/year
Annual savings: $400-550

Over 15 years, that’s $6,000-$8,250 in energy savings—often enough to offset a significant portion of the new system cost.

The Efficiency Calculation

When evaluating repair vs. replacement, add projected energy savings to your analysis:

Example:

New system cost: $8,000
Repair cost: $2,500
Annual energy savings with new system: $450
10-year energy savings: $4,500

True cost comparison:

Repair: $2,500 (plus continued high energy bills)
Replace: $8,000 – $4,500 energy savings = $3,500 effective cost

Suddenly replacement looks much more competitive—and you get a warranty, reliability, and better comfort.

Rebates and Incentives: Money You Might Be Leaving on the Table

Before finalizing your decision, research available rebates and incentives. These can significantly shift the math toward replacement.

Federal Tax Credits

The Inflation Reduction Act of 2022 established significant tax credits for high-efficiency HVAC equipment:

Heat pumps: Up to $2,000 tax credit for qualifying systems
Central air conditioners: Up to $600 tax credit for qualifying systems
Requirements: Must meet specific efficiency standards (typically 16+ SEER2 for AC, varies for heat pumps)

These are tax credits, not deductions—they reduce your tax bill dollar-for-dollar.

Utility Rebates

Dominion Energy and other South Carolina utilities periodically offer rebates for high-efficiency equipment:

Typical rebates: $200-$500 for qualifying systems
Requirements: Vary by program and change frequently
How to claim: Usually requires proof of purchase and installation by a licensed contractor

Check with your utility provider or ask your HVAC contractor about current programs.

Manufacturer Rebates

HVAC manufacturers frequently offer seasonal rebates:

Typical savings: $100-$1,000 depending on equipment and timing
Best timing: Spring and fall often have the best promotions
How to access: Through participating dealers (like Coastal Carolina Comfort)

Financing Options

Many homeowners don’t realize that financing a new system can result in lower monthly costs than continuing to repair:

Example:

Old system: $150/month energy bills + $100/month average repair costs = $250/month
New system: $100/month energy bills + $120/month financing payment = $220/month

You’re paying less monthly AND building equity in new equipment.

Summerville-Specific Factors

National advice doesn’t always apply to the Lowcountry. Here are local factors to weigh:

Climate Demands

Summerville’s climate is brutal on HVAC equipment:

Extended cooling season: 8-9 months of AC use
High humidity: Systems work harder for dehumidification
Salt air: Coastal proximity accelerates corrosion (especially in systems closer to Charleston)
Intense summer heat: Systems run at maximum capacity for extended periods

These factors mean Summerville systems age faster than national averages suggest. A 12-year-old system here has seen more wear than a 15-year-old system in a milder climate.

Local Energy Costs

South Carolina electricity rates are moderate compared to national averages, but summer bills still climb significantly. The efficiency gains from a new system translate to real savings—typically $300-$600 annually for most Summerville homes.

Home Values and Buyer Expectations

If you’re considering selling your home in the next few years, HVAC age matters to buyers:

New or recent HVAC: Selling point that can increase offers
Aging HVAC: Buyers often negotiate price reductions or request replacement
Failed inspection: An HVAC issue discovered during inspection can derail sales

Replacing an aging system before listing often returns more value than the cost of the equipment.

Humidity Control

Older systems, especially oversized ones, often struggle with humidity control. If your home feels clammy even when the AC runs, a new properly-sized system with modern humidity management can dramatically improve comfort.

Component-by-Component: Repair or Replace?

Not all repairs are created equal. Here’s guidance on specific components:

Usually Worth Repairing

Capacitors ($150-$400): Normal wear item. Replace and move on unless the system is very old.

Contactors ($150-$350): Another wear item. Reasonable repair for any system under 15 years.

Fan motors ($300-$700): Common failure, straightforward repair. Worth fixing on systems under 12-15 years.

Refrigerant recharge—R-410A ($200-$500): If the leak is minor and repairable, this is reasonable for newer systems.

Thermostat ($150-$400): Not technically part of the HVAC system. Replace as needed regardless of system age.

Evaluate Carefully

Evaporator coil ($1,000-$2,500): Major repair. Worth it for systems under 10 years; questionable for older systems.

Condenser coil ($1,200-$2,800): Similar to evaporator coil. Age is the deciding factor.

Blower motor ($400-$900): Mid-range repair. Usually worth it unless the system has other issues.

Refrigerant leak repair ($300-$1,500): Depends on leak location and refrigerant type. R-22 leaks almost always mean replacement.

Usually Means Replacement

Compressor ($1,500-$3,000+): The heart of the system. At this cost, replacement usually makes more sense for any system over 8-10 years old.

Heat exchanger ($1,500-$3,500): Critical safety component in furnaces. Failure in older systems typically warrants replacement.

Multiple simultaneous failures: When two or more major components fail together, the system is telling you something.

R-22 refrigerant issues: Any significant repair on an R-22 system should trigger replacement consideration.

The Decision Framework: Putting It All Together

Here’s a step-by-step process to make your decision:

Step 1: Get the Facts

Exact repair cost (in writing)
System age
Refrigerant type
Repair history (past 2-3 years)
Current system efficiency (SEER rating)

Step 2: Apply the 50% Rule

Get a quote for replacement
Compare repair cost to 50% of replacement cost
Adjust threshold based on system age

Step 3: Factor in Hidden Costs

Energy efficiency difference
Likely future repairs
R-22 refrigerant costs (if applicable)
Comfort and reliability value

Step 4: Research Incentives

Federal tax credits
Utility rebates
Manufacturer promotions
Financing options

Step 5: Consider Your Timeline

How long do you plan to stay in the home?
Can you budget for replacement in 1-2 years if you repair now?
Is this the right season for replacement (spring/fall often have better pricing and availability)?

Step 6: Get a Second Opinion

If you’re unsure, get another quote. A reputable company will give you an honest assessment—even if it means less money for them.

At Coastal Carolina Comfort, we’ll tell you when repair makes sense, even if replacement would be more profitable for us. Your trust matters more than one transaction.

Making the Call

There’s no universally “right” answer to the repair vs. replace question. But there is a right answer for your specific situation—based on your system’s condition, your budget, your plans, and your priorities.

Here’s what we know after thousands of these conversations:

Repair makes sense when:

System is under 10 years old
Repair cost is under 30-40% of replacement
First major repair on the system
R-410A refrigerant
You plan to move within 2-3 years (and system will pass inspection)

Replacement makes sense when:

System is over 12-15 years old
Repair cost exceeds 50% of replacement
Multiple repairs in recent years
R-22 refrigerant
Compressor or other major component failure
Efficiency is significantly below modern standards
Comfort issues persist despite repairs

When you’re genuinely on the fence:

Get multiple opinions
Factor in peace of mind and reliability
Consider financing that makes monthly costs comparable
Trust your gut—if you’re dreading another repair call, that matters

We’re Here to Help You Decide

At Coastal Carolina Comfort, we don’t push replacement when repair makes sense. We also won’t let you throw money at a system that’s past its prime.

When you call us for a repair estimate, we’ll give you:

Honest diagnosis: What’s actually wrong and what it costs to fix
Context: How this repair fits into your system’s overall condition and history
Options: Repair cost, replacement cost, and our professional recommendation
No pressure: The decision is yours, and we’ll support whatever you choose

Whether you need a repair to get through another few years or you’re ready to invest in new equipment, we’ll make sure you’re making an informed decision.

Schedule your assessment today or call us at 843-256-6476. We’ll help you figure out the right path forward—no sales pitch, just straight talk.

Frequently Asked Questions

How much does a new HVAC system cost in Summerville?

A complete HVAC system replacement in Summerville typically ranges from $6,000-$15,000+ depending on system size, efficiency rating, brand, and installation complexity. A standard 3-ton, 16 SEER system for an average home runs $7,000-$10,000 installed. High-efficiency systems and heat pumps cost more upfront but offer greater long-term savings.

Should I repair my AC if I’m selling my house soon?

It depends on the repair and your timeline. Minor repairs that ensure the system passes inspection are usually worthwhile. Major repairs on old systems may not return their value—buyers often prefer a credit toward replacement or a price reduction. If your system is over 12-15 years old and needs significant work, replacing before listing often yields better results.

Can I replace just the outdoor unit or just the indoor unit?

Technically yes, but it’s rarely recommended. Mismatched components reduce efficiency, may void warranties, and often cause premature failure. The EPA also requires that replacement components use the same refrigerant—you can’t mix R-22 and R-410A equipment. In most cases, replacing the complete system is the better investment.

How long does HVAC replacement take?

A standard replacement takes 4-8 hours for most Summerville homes. Complex installations, ductwork modifications, or system relocations may require additional time. Most replacements are completed in a single day, and you’ll have heating or cooling by evening.

Is it better to replace HVAC in summer or winter?

Spring and fall typically offer the best combination of pricing, availability, and comfort. You’re not desperate (so no emergency pricing), contractors aren’t slammed (so better scheduling), and you can survive a day without heating or cooling if needed. That said, if your system fails in July, waiting until October isn’t practical—we’re here year-round when you need us.

Share This Post

Get 10% Off Your First Service and a FREE Quote

More To Explore

HVAC

The Summerville HVAC Maintenance Checklist

The Summerville HVAC Maintenance Checklist That Prevents 90% of Repairs Regular HVAC maintenance prevents up to 90% of common repairs and extends system lifespan by 5-7 years. Summerville homeowners should perform monthly tasks (filter checks, vent clearing, thermostat monitoring), seasonal tasks (condensate drain treatment, outdoor unit cleaning, refrigerant line inspection), and schedule professional tune-ups twice yearly—in spring before cooling season and fall before heating season. The Lowcountry’s extreme humidity, extended cooling season, and airborne particulates demand more frequent maintenance than national guidelines suggest. A well-maintained system runs more efficiently, breaks down less often, and keeps your home comfortable year-round. Introduction: The Cheapest Repair Is the One You Never Need Here’s a number that should get your attention: 90%. That’s the percentage of HVAC repairs that could have been prevented with proper maintenance. Nine out of ten service calls we make in Summerville are for problems that didn’t have to happen. Clogged filters that caused compressors to overheat. Condensate drains that backed up and flooded ceilings. Capacitors that failed because coils were too dirty to dissipate heat. Refrigerant leaks that started as minor corrosion nobody caught. Every one of these repairs cost the homeowner hundreds—sometimes thousands—of dollars. And every one of them was preventable. At Coastal Carolina Comfort, we’ve maintained HVAC systems across the Lowcountry for over a decade. We’ve seen what neglect does to equipment in our climate. We’ve also seen homeowners who follow a simple maintenance routine go 10+ years without a single major repair. This guide gives you that routine. It’s specifically designed for Summerville’s climate—not generic advice written for somewhere with mild summers and low humidity. Follow this checklist, and you’ll dramatically reduce your repair bills, extend your system’s life, and stay comfortable no matter what the Lowcountry weather throws at you. Why Summerville Systems Need More Maintenance Before we dive into the checklist, let’s talk about why maintenance matters more here than almost anywhere else. The Extended Cooling Season In Minneapolis, an AC might run 4 months per year. In Summerville, we’re cooling 8-9 months—sometimes longer. That’s twice the operating hours, twice the wear, and twice the opportunity for problems to develop. A system that runs from April through November accumulates wear equivalent to nearly two years of operation in a milder climate. Maintenance intervals need to reflect that reality. The Humidity Factor Summerville’s average humidity hovers around 70-80% year-round. During summer mornings, it regularly exceeds 90%. This humidity: Forces your system to work harder (dehumidification uses significant energy) Creates ideal conditions for biological growth in drain lines and on coils Accelerates corrosion on electrical components and refrigerant lines Causes condensate drain clogs—one of the most common service calls we see Related: Learn how Summerville’s humidity damages HVAC systems Airborne Particulates Between pollen season (which feels like it lasts 8 months here), coastal salt air, and general Lowcountry dust, your system filters more particulates than systems in cleaner environments. Filters clog faster, coils get dirtier, and airflow restrictions develop more quickly. The Bottom Line National maintenance guidelines assume average conditions. Summerville doesn’t have average conditions—we have extreme conditions. Your maintenance routine needs to account for that. Monthly Maintenance Tasks These quick tasks take 10-15 minutes and should become habit. Do them on the same day each month—the first Saturday, the day you pay your mortgage, whatever helps you remember. 1. Check and Replace Your Air Filter This is the single most important thing you can do for your HVAC system. A clogged filter: Restricts airflow, forcing your system to work harder Causes evaporator coils to freeze Leads to compressor overheating and failure Increases energy consumption by 5-15% Reduces indoor air quality How to check: Locate your filter (return air grille, air handler, or dedicated filter slot) Remove the filter and hold it up to light If you can’t see light through it clearly, replace it If it’s visibly gray or caked with debris, replace it immediately Summerville-specific guidance: During peak cooling season (May-September), check weekly and replace every 30-45 days During shoulder seasons, check monthly and replace every 45-60 days During pollen season (spring), you may need to replace every 2-3 weeks After storms or high-wind events, check immediately Filter recommendations: Use pleated filters rated MERV 8-11 for best balance of filtration and airflow Avoid fiberglass filters (minimal filtration) and ultra-high MERV ratings (can restrict airflow) Buy filters in bulk—you’ll use 8-12 per year in Summerville 2. Clear Supply and Return Vents Blocked vents disrupt airflow balance and force your system to work harder. Monthly walkthrough: Check all supply vents (where air blows out) for obstructions Check all return vents (where air is pulled in) for blockages Move furniture, curtains, rugs, or stored items that block airflow Vacuum vent covers to remove dust buildup Ensure all vents are open (closing vents doesn’t save energy—it creates pressure imbalances) 3. Monitor Thermostat Performance Your thermostat is the brain of your HVAC system. Small issues here cause big problems. Monthly checks: Verify the display is clear and responsive Confirm the temperature reading seems accurate (compare to a separate thermometer) Check that the system responds when you adjust settings Replace batteries annually (or when the low battery indicator appears) For smart thermostats, ensure WiFi connection is stable Warning signs: Temperature swings greater than 2-3 degrees from setpoint System not responding to setting changes Blank or flickering display “Auxiliary heat” running frequently (for heat pump systems) 4. Listen and Observe Your system tells you when something’s wrong—if you’re paying attention. Monthly awareness check: Listen for unusual noises (grinding, squealing, banging, clicking) Notice any unusual odors from vents Feel for weak airflow or temperature inconsistencies Watch for water around the indoor unit Check for ice on refrigerant lines (visible at the outdoor unit) Related: Know the 5 warning signs your AC is about to break down Seasonal Maintenance Tasks These tasks should be performed quarterly or at the start of each season. They’re more involved than monthly tasks but still manageable for most homeowners. Spring: Prepare for Cooling Season Complete these tasks in

Derrick Hall January 28, 2026

Air Conditioning

HVAC Repair vs. Replacement

HVAC Repair vs. Replacement: A Summerville Homeowner’s Decision Guide Deciding between HVAC repair and replacement comes down to four key factors: the cost of repair relative to replacement (use the 50% rule—if repairs exceed half the cost of a new system, replace), the age of your equipment (systems over 15 years old are usually better replaced), refrigerant type (R-22 systems should be replaced due to phase-out costs), and repair frequency (multiple repairs per year signal it’s time). Summerville homeowners should also factor in energy efficiency gains, available rebates, and the demanding Lowcountry climate that shortens system lifespans compared to national averages. The Question Every Homeowner Dreads Your HVAC technician just delivered the news: your system needs a major repair. Maybe it’s a compressor. Maybe it’s a coil leak. Whatever it is, the number has four digits, and now you’re facing the question every Summerville homeowner eventually confronts. Do I fix it, or do I replace the whole thing? It’s not an easy decision. Repair feels like the cheaper option—until you’re repairing again six months later. Replacement feels like the responsible choice—until you see the price tag. And everyone from your neighbor to your brother-in-law has an opinion. At Coastal Carolina Comfort, we’ve guided thousands of Lowcountry homeowners through this exact decision. We’ve seen people waste money repairing systems that should have been replaced years ago. We’ve also seen people replace perfectly good equipment because someone talked them into it. This guide will give you the framework to make the right decision for your situation—not based on sales pressure, but on facts, math, and what actually makes sense for your home and budget. The 50% Rule: Your Starting Point The most reliable rule of thumb in the HVAC industry is simple: If the repair costs more than 50% of what a new system would cost, replace instead of repair. Here’s why this works: The Math Behind the Rule Let’s say a new HVAC system for your Summerville home costs $8,000 installed. Using the 50% rule: Repair cost under $4,000: Repair is likely the better value Repair cost over $4,000: Replacement makes more financial sense But this isn’t just about today’s repair. It’s about what comes next. A system that needs a $3,500 repair today is likely to need another significant repair within 1-2 years. That’s the nature of aging equipment—when major components fail, others are usually close behind. So that $3,500 repair might actually cost you $3,500 + $1,200 + $800 over the next two years. Suddenly you’ve spent $5,500 and still have an old, inefficient system. When to Adjust the Rule The 50% rule is a starting point, not an absolute. Adjust based on: System age: For systems under 8 years old, you might stretch to 60-70% before replacing—they likely have more good years ahead. For systems over 12 years old, consider replacing at 30-40% of replacement cost. Repair history: If this is the first major repair on a well-maintained system, lean toward repair. If it’s the third repair this year, lean toward replacement regardless of cost. Component involved: Some repairs (capacitor, contactor, fan motor) are normal wear items that don’t indicate broader system failure. Others (compressor, evaporator coil) often signal the beginning of the end. The Age Factor: How Old Is Too Old? System age is the second most important factor in your decision. Average HVAC Lifespan National average: 15-20 years with proper maintenance Summerville reality: 12-16 years is more typical Why the difference? Our systems work harder. A Summerville AC runs 8-9 months per year, often 12+ hours per day during summer. Compare that to a system in Minneapolis that might run 4 months per year. More operating hours means faster wear. Age-Based Decision Framework Under 8 years old: Almost always repair unless the cost exceeds 50% of replacement. These systems have significant life remaining. 8-12 years old: Evaluate carefully. Major repairs may be worthwhile, but start planning for eventual replacement. This is a good time to begin saving. 12-15 years old: Lean toward replacement for major repairs. The system is in its final years, and repair money is often better invested in new equipment. Over 15 years old: Replace for any significant repair. Even if the repair is relatively affordable, you’re likely facing additional failures soon. The efficiency gains alone often justify replacement. The Warranty Consideration Most HVAC systems come with: 5-10 year compressor warranty 5-10 year parts warranty 1 year labor warranty (sometimes extended by the installer) If your system is still under warranty, repair almost always makes sense—your out-of-pocket cost is limited to labor and any non-covered parts. Check your paperwork or call your installer to verify warranty status before making any decisions. The R-22 Refrigerant Problem If your system uses R-22 refrigerant (also called Freon or HCFC-22), this single factor may make your decision for you. What Happened to R-22 R-22 was the standard air conditioning refrigerant for decades. However, due to its ozone-depleting properties, the EPA phased it out: 2010: No new R-22 systems could be manufactured 2020: Production and import of R-22 banned entirely This means all R-22 available today is either recycled or reclaimed from decommissioned systems. Supply is limited and shrinking every year. The Cost Impact R-22 prices have skyrocketed: 2010: Approximately $10-15 per pound 2020: Approximately $50-75 per pound 2026: $100-200+ per pound depending on availability A typical residential AC system holds 6-12 pounds of refrigerant. If your R-22 system develops a leak, you’re looking at: Leak repair: $200-$1,000+ depending on location Refrigerant recharge: $600-$2,400+ for a full charge Total cost: Often $1,000-$3,000+ for a single repair And here’s the kicker—if it leaks once, it will likely leak again. You could face these costs repeatedly. How to Know If You Have R-22 Check the data plate on your outdoor unit. Look for: “R-22” or “HCFC-22” = R-22 system (consider replacement) “R-410A” or “Puron” = Modern refrigerant (repair may make sense) If your system was installed before 2010, it almost certainly uses R-22. Systems installed 2010-2015 could be either. Systems installed after 2015 are virtually all R-410A. Our Recommendation If you have an R-22 system that needs any refrigerant-related repair, replace